Cisco Systems 9000 Manual De Usuario
2-43
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter 2 Unpacking and Installing the Chassis
Rack-Mounting the Router Chassis
Installing the Chassis in a 2-Post Rack
This section describes how to install the chassis in a 2-post telco-style rack. Two people can lift an empty
router chassis using the handles on the sides. To accommodate racks with different hole patterns in their
mounting flanges, the chassis rack-mounting flanges have three groups of eight oblong screw holes on
each side.
router chassis using the handles on the sides. To accommodate racks with different hole patterns in their
mounting flanges, the chassis rack-mounting flanges have three groups of eight oblong screw holes on
each side.
Caution
An empty chassis weighs approximately 150 pounds (68 kg). You need two people to slide the chassis
into the equipment rack safely.
into the equipment rack safely.
shows the orientation of the Cisco ASR 9010 Router chassis to the rack posts (3” or 6”
channel width) of an industry-standard 2-post rack and components used in the installation.
Figure 2-38
Installing the Cisco ASR 9010 Router Chassis in a Standard 2-Post Rack
1
Five screws per side (minimum) to attach the router chassis to the rack
243187
1
2
3
4