Cisco Systems 9000 Manual De Usuario
2-66
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter 2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure 2-58
Locations for the Six Ball Studs on the Cisco ASR 9010 Router
Step 5
Attach the left and right hinge brackets to the chassis using four screws for each bracket. Tighten the
screws to a torque of 11 in-lb (1.20 N-m). The L-shaped brackets should align with the holes in the cable
management tray from which you removed the screws.
screws to a torque of 11 in-lb (1.20 N-m). The L-shaped brackets should align with the holes in the cable
management tray from which you removed the screws.
Step 6
Secure the L-shaped brackets to the chassis and cable management tray by re-inserting and tightening
the cable management tray screws you removed (
the cable management tray screws you removed (
).
303445