Cisco Systems 9000 Manual De Usuario
2-67
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter 2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure 2-59
Installing the Hinge Brackets and L-Shaped Brackets on the Cisco ASR 9010 Router
Step 7
Install the mid-cover with door lock (item 6 in
) by engaging it to the upper four ball studs
and lining up the grooves in the top outside edges of the mid-cover with ridges at the bottom of the hinge
brackets.
brackets.
Step 8
Attach two doors to the hinge brackets (one per side). For each door:
a.
Align the door hinge hole with the bracket hinge hole (
).
b.
Insert the captive pin in the door hinge through the hole in the bracket hinge.
1
Install each hinge bracket, with an L-shaped
bracket attached, using four screws.
bracket attached, using four screws.
2
After the hinge brackets are installed, secure
each L-shaped bracket to the cable
management tray and chassis with the screw
that you previously removed from that
location.
each L-shaped bracket to the cable
management tray and chassis with the screw
that you previously removed from that
location.
249244
1
2