Cisco Systems 861WGNPK9RF Manual De Usuario
3-6
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
OL-16193-01
Chapter 3 Connecting the Router
Connecting a Terminal or PC to the Console Port
Connecting a Terminal or PC to the Console Port
Connect a terminal or PC to the Console Aux port either to configure the software by using the
command-line interface (CLI) or to troubleshoot problems with the router.
command-line interface (CLI) or to troubleshoot problems with the router.
To connect a terminal or PC to the console port on the router and access the CLI, follow these steps:
Step 1
Connect the RJ-45 end of a DB-9–to–RJ-45 serial cable to the RJ-45 Console Aux port on the router.
shows the RJ-45 end of the serial cable connected to the Console Aux port on the router.
Figure 3-4
Connecting a Terminal or PC to the Console Port
Step 2
Connect the DB-9 end of the DB-9–to–RJ-45 serial cable to the to the COM port on your laptop or PC.
Note
Some laptops and personal computers do not come with DB-9 serial port connectors and may
use a USB-to-serial port adapter.
use a USB-to-serial port adapter.
Step 3
To communicate with the router, start a terminal emulator application.
Terminal Emulator Settings
Use the following settings for the terminal emulator connection:
•
9600 baud
•
8 data bits, no parity
•
1 stop bit
1
RJ-45 connector to the Console Aux port on
the router
the router
2
DB-9 connector
2
1
231990
FE0
FE1
FE2
FE3