Delta Electronics DUP-B Manual De Usuario
Chapter 3 Creating and Editing Screens
Designate Recipe Group Number
Bits 8 to Bit 15 designate the recipe group number. When the recipe group number is
designated and turn ON this control flag, HMI will change the value of RCPG and
change the recipe group number automatically.
For example (refer to Table 3-4-1), if set D5 to 520 or set$20.3 and $20.9 to 1
simultaneously, the recipe group number will become 2 (RCPG=2). When D5 = 520, it
indicates that Bit 3 and Bit 9 of D5 are both 1(0000 0010 0000 1000).
For more detailed settings, please refer to the following descriptions.
How to designate recipe group number:
Bits 8 to Bit 15 designate the recipe group number. When the recipe group number is
designated and turn ON this control flag, HMI will change the value of RCPG and
change the recipe group number automatically.
For example (refer to Table 3-4-1), if set D5 to 520 or set$20.3 and $20.9 to 1
simultaneously, the recipe group number will become 2 (RCPG=2). When D5 = 520, it
indicates that Bit 3 and Bit 9 of D5 are both 1(0000 0010 0000 1000).
For more detailed settings, please refer to the following descriptions.
How to designate recipe group number:
D5 = 520(0000 0010 0000 1000)
High Byte
(Recipe Group Designation Register)
0000 0010
Low Byte
(Other control flags relevant to Recipe)
0000 1000
If dividing D5 into high byte and low byte, it is easily to see that high byte determines
the recipe group number (regardless of low byte). When the high byte setting is set to
0000 0010, it indicates that the designated group number is the 2nd group. If the
high byte setting is changed to 0000 0011, it indicates that the designated group
number is changed to 3rd group and vise versa.
the recipe group number (regardless of low byte). When the high byte setting is set to
0000 0010, it indicates that the designated group number is the 2nd group. If the
high byte setting is changed to 0000 0011, it indicates that the designated group
number is changed to 3rd group and vise versa.
Recipe Number Designation Register (RBIR)
This register is used to specify the recipe. When this flag is turned ON, the system will write
the designated recipe group number into Recipe Number Designation Register (RBIR). After
Change Recipe Number Flag is turned ON, HMI will change the value of RCPNO and change
the recipe number as well.
the designated recipe group number into Recipe Number Designation Register (RBIR). After
Change Recipe Number Flag is turned ON, HMI will change the value of RCPNO and change
the recipe number as well.
For example (refer to Table 3-4-1), if set D6 to 3 and set D5 or $20.0 to 1 at the same time,
the recipe number will become 3 (RCPNO=3) When D6 is set to 3, it indicates that the
designated recipe number is 3. When D5 = 1, it indicates that Bit 0 of D5 is 1(0000 0000
0000 0001).
the recipe number will become 3 (RCPNO=3) When D6 is set to 3, it indicates that the
designated recipe number is 3. When D5 = 1, it indicates that Bit 0 of D5 is 1(0000 0000
0000 0001).
System Control Flag Register
Bit
Binary Display of Relative
Position (x)
Function
0-7 0000
0000
xxxx
xxxx
Multi-language Setting Value
8
0000 000x 0000 0000
Printer Flag
9
0000 00x0 0000 0000
Printer Form Feed Flag
10-15
xxxx xx00 0000 0000
Reserved
3-34
Revision May, 2010