3com WL-575 Manual De Usuario
6-13
Using the Command Line Interface
System Management Commands
These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
browser management options, clock settings, and a variety of other system
information.
Table 11 System Management Commands
country
This command configures the access point’s country code, which identifies the
country of operation and sets the authorized radio channels.
This command configures the access point’s country code, which identifies the
country of operation and sets the authorized radio channels.
Command
Function
Mode
Page
Country Setting
country
Sets the access point country code
Exec
Device Designation
prompt
Customizes the command line prompt
GC
system name
Specifies the host name for the access point
GC
snmp-server contact
Sets the system contact string
GC
snmp-server location
Sets the system location string
GC
Management Access
username
Configures the user name for management access
GC
password
Specifies the password for management access
GC
ip ssh-server enable
Enables the Secure Shell server
IC-E
ip ssh-server port
Sets the Secure Shell port
IC-E
ip telnet-server enable Enables the Telnet server
IC-E
APmgmtIP
Specifies an IP address or range of addresses allowed access
to the management interface
to the management interface
GC
APmgmtUI
Enables or disables SNMP, Telnet or web management access GC
show APmanagement
Shows the AP management configuration
Exec
Web Server
ip http port
Specifies the port to be used by the web browser interface GC
ip http server
Allows the access point to be monitored or configured from
a browser
a browser
GC
ip https port
Specifies the UDP port number used for a secure HTTP
connection to the access point’s Web interface
connection to the access point’s Web interface
GC
ip https server
Enables the secure HTTP server on the access point
GC
web-redirect
Enables web authentication of clients using a public access
Internet service
Internet service
GC
System Status
show system
Displays system information
Exec
show version
Displays version information for the system
Exec
show config
Displays detailed configuration information for the system
Exec
show hardware
Displays the access point’s hardware version
Exec