3com WL-575 Manual De Usuario
6-79
Using the Command Line Interface
address filter default
This command sets filtering to allow or deny listed MAC addresses.
This command sets filtering to allow or deny listed MAC addresses.
Syntax
address filter default <allowed | denied>
• allowed - Only MAC addresses entered as “denied” in the address
filtering table are denied.
• denied - Only MAC addresses entered as “allowed” in the address
filtering table are allowed.
Default
allowed
Command Mode
Global Configuration
Example
Related Commands
address filter entry
This command enters a MAC address in the filter table.
This command enters a MAC address in the filter table.
Syntax
address filter entry <mac-address> <allowed | denied>
• mac-address - Physical address of client. (Enter six pairs of hexadecimal
digits separated by hyphens; e.g., 00-90-D1-12-AB-89.)
• allowed - Entry is allowed access.
• denied - Entry is denied access.
• denied - Entry is denied access.
mac- authentication
session-timeout
session-timeout
Sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication
database
re-authenticated with the RADIUS server authentication
database
GC
show authentication
Shows all 802.1X authentication settings, as well as the
address filter table
address filter table
Exec
Outdoor 11a Building to Building (config)#address filter default denied
Outdoor 11a Building to Building (config)#
Command
Function
Mode
Page