3com OfficeConnect Remote 812 Manual De Usuario

The OCR 812 can act as a DHCP server, providing IP addresses to other stations on 
the local LAN.

It is possible to restrict access to the TFTP server to a specific system or a list of 
systems. Quick Setup will allow you to enter one system that is allowed or allow 
access to all systems.

IP  setup is completed.

The network name is used by the OCR 812 to identify your IPX network.

The network number is a non-zero hexadecimal number of up to 8 digits.

You need to specify the framing for the IPX network. It should be one of the 
following: “ethernet_ii”, “snap”, “dsap”, “novell_8023.”

Do you want the OfficeConnect Remote 812 to act 
as a DHCP server?

[yes]

Enter the start address for the DHCP IP address 
pool:

[ ]

Enter the end address for the DHCP IP address 
pool:

[ ]

Do you want to allow all systems to access the TFTP 
server?

[yes]

Enter the name of your network: 

[ipx]

Enter the ipx network number: 

[ ]

Question

Default

System

What is the framing for the IPX network ? 

[ethernet_ii]