3com OfficeConnect Remote 812 Manual De Usuario
4-6
C
HAPTER
4: Q
UICK
S
ETUP
Quick Setup Bridge Information
The network name is used by the OCR 812 to identify your bridging setup.
The spanning tree algorithm is used to eliminate loops in a network that is linked
together with bridges.
together with bridges.
Would you like to review your current settings before executing [yes]?
Sample Identification Information
This section contains a sample of possible settings.
Management Information:
Console Login Required:
Console Login Required:
yes
Console Login Password:
password
SNMP Management:
SNMP Community:
SNMP Community:
public
SNMP IP Address:
0.0.0.0
SNMP Read&Write:
yes
TELNET Management:
TELNET User:
TELNET User:
root
TELNET Password:
!root
IP Information:
IP Network Name:
IP Network Name:
ip
IP Network Address:
192.168.200.254
IP Mask:
C
IP Frame Type:
ethernet_ii
IP RIP:
v2
DHCP Server:
Enabled
DHCP Pool Start IP Address:
192.168.200.1
DHCP Pool End IP Address:
192.168.200.40
TFTP Server Information:
TFTP Access:
TFTP Access:
Any system
IPX Information:
IPX Network Name:
IPX Network Name:
ipx
IPX Network Number:
12345661
IPX Frame Type:
ethernet_ii
Bridge Information:
Bridge Network Name:
Bridge Network Name:
bridge
Spanning Tree:
no
Do you want to change any answers [no]?
Do you want to actually execute these commands [yes]?
Question
Default
Your System
Enter the network name:
[bridge]
Question
Default
System
Do you want to run the spanning tree algorithm?
[no]