3com OfficeConnect Remote 812 Manual De Usuario
6-10
C
HAPTER
6: M
ANUAL
S
ETUP
Configuring
Authentication and
Encryption
To learn how to use CLI commands to configure authentication and encryption for
the OCR 812, please refer to the following:
the OCR 812, please refer to the following:
To configure authentication parameters, see
To configure a Windows 2000 Server for CHAP authentication, see
To configure MPPE encryption, see
.
To set up MPPE, note that you must also configure the OCR 812 to use the
MSCHAPv1 authentication protocol.
MSCHAPv1 authentication protocol.
To configure the OCR 812 to use MSCHAPv1, enter the
command and specify the MSCHAPv1 option.
To learn more about MPPE, please visit the Microsoft corporate web site at
www.microsoft.com.
www.microsoft.com.
To configure a Windows 2000 Server for L2TP encryption, see
To configure a Cisco Router for L2TP encryption, see
Configuring Windows 2000 Server to Support CHAP Authentication
Microsoft supports CHAP authentication for both PPTP and L2TP tunnels.
However, to configure CHAP authentication for a Windows 2000 Server, you must
ensure that store pw using reversible encryption for all users in domain is
set to enabled before adding users.
However, to configure CHAP authentication for a Windows 2000 Server, you must
ensure that store pw using reversible encryption for all users in domain is
set to enabled before adding users.
If you add users before you enable store pw using reversible encryption for all
users in domain, you must enable the option and then re-enter the passwords
for all users in the domain.
users in domain, you must enable the option and then re-enter the passwords
for all users in the domain.
To Configure authentication for your Windows 2000 Server.
1 Set up the Windows 2000 Server with IP address 123.45.67.89.
2 Add the authentication protocols you wish to use. See
for
more information.
To configure CHAP authentication for your Windows 2000 Server, set store pw
using reversible encryption for all users in domain to enable, as follows:
using reversible encryption for all users in domain to enable, as follows:
a Select Programs->Administrative Tools->Local Security Policy.
b Select Security Settings\Account Policies\Password Policy.
3 When prompted, enter the password secret.
4 Add all users for the domain.