3com SuperStack 3 NBX Manual De Usuario

4 Click OK. The system adds the new NBX 1105 Attendant Console.

This section describes how to modify an existing Attendant Console. You 
can change an Attendant Console’s device number or associated 
telephone. Every Console must be associated with a telephone. To modify 
an existing NBX 1105 Attendant Console:

1 Select NBX NetSet > Device Configuration > Attendant Console. 

2 Select the Attendant Console that you want to modify and click Modify. 

The Modify dialog box appears.

3 Change the desired fields. 

 describes each field.

4 Click Apply to make the changes and then click OK.

Use the Status button on the Attendant Console tab to check the status 
of an Attendant Console. You can also reboot it from this tab with the 
Reset Device option.

Auto-Assign Button 
Mappings

Based on what is in the database, maps all existing 
extensions, except for the Associated Telephone, to the 
Access buttons on the Attendant Console. Each extension 
has its own button on the Attendant Console.

The four Feature buttons along the bottom of the 
Attendant Console are mapped, from left to right, to 
Transfer, Transfer to Voice Mail, Park, and Hold.

Auto-Assign Button Mappings works with a new device 
only. After it has been initially configured, changes to the 
mappings must be done manually.

Mapping can be done manually by selecting Device 
Configuration, Attendant Console, Button Mappings.

Table 27 Add Attendant Console Fields (continued)

Table 28   Modify Attendant Console Status Fields

MAC Address

The MAC (Media Access Control) address of the 
Attendant Console.

Device Name

(Optional) A name that identifies this device when it 
appears in lists in the NBX NetSet utility.

Associated Telephone

The telephone extension associated with this Console.