3com SuperStack 3 NBX Manual De Usuario

When the maximum number of calls on a route point is reached (see 

), subsequent calls routed into the route point from an internal 

extension or through a Virtual Tie Line ring for 10 seconds and are then 
disconnected. If the call arrives through a line card port, the call continues 
ringing. 

To create a new TAPI Route Point, the NBX system administrator performs 
these steps:

1 Log on to the NBX NetSet utility using the administrator login ID and 

password.

2 In the NBX NetSet - Main Menu window, click User Configuration > TAPI 

Route Points tab.

3 Click Add to open the Add TAPI Route Point dialog box.

4 Enter the appropriate information in the fields. 

 describes each 

field.

Table 51   TAPI Route Point Capacities

SuperStack3 NBX

100

400

NBX 100

48

50

Table 52   Add TAPI Route Point Dialog Box — Fields and Their Purposes

Name

Enter a description of the TAPI Route Point that will help you 
differentiate it from other TAPI Route Points.

The name must be no longer than 30 characters and can 
contain the characters from A through Z, a through z, 
0 through 9, hyphens (-), and underscores (_).

TAPI Password

Enter a password that must be used by any external TAPI 
application that wants to monitor the route point. The 
password must be at least 4 digits and no more than ten 
digits in length and must contain only numeric characters.

NOTE: For security reasons, the NBX system always requires 
that an external application supply a password to access a 
route point. The state of the Require passwords for TAPI 
clients field in the System Configuration > TAPI Settings tab 
has no effect on TAPI route point security.