3com SuperStack 3 NBX Manual De Usuario
Using a VTL Password
99
To place a hop-off call to 555-1212 in area code 903 through the Atlanta
system, a user on a remote system would dial 72919035551212. The 72
code sets up a VTL connection to Atlanta that incudes the Atlanta
system’s VTL password, and the remaining digits are used to dial the
number (9 accesses an outside line to obtain dial tone from the local
carrier, 1 accesses the long-distance carrier, and the remaining digits
specify the long-distance number).
system, a user on a remote system would dial 72919035551212. The 72
code sets up a VTL connection to Atlanta that incudes the Atlanta
system’s VTL password, and the remaining digits are used to dial the
number (9 accesses an outside line to obtain dial tone from the local
carrier, 1 accesses the long-distance carrier, and the remaining digits
specify the long-distance number).
If the same user used site code 62 to place a call to the Atlanta office,
only toll-free, emergency, and internal call would be allowed.
only toll-free, emergency, and internal call would be allowed.
Toll Calls Without a
VTL Password
If a local user has configured his telephone to forward calls to a
long-distance number, then an incoming VTL call to that telephone does
not need to supply the local system’s VTL password in order for the call to
be forwarded.
long-distance number, then an incoming VTL call to that telephone does
not need to supply the local system’s VTL password in order for the call to
be forwarded.
Music On Hold
If two users are talking on a VTL connection, and the first user places the
call on hold, the second user hears Music On Hold only if his local system
is configured to play it.
call on hold, the second user hears Music On Hold only if his local system
is configured to play it.
Troubleshooting VTL
Calls
contains a list of error situations, the possible causes and the
action to take in each case.
Table 21 VTL Errors and Corrections
Error Condition
Possible Causes
Actions
Long pause after dialing. Telephone display contains
“VTL” during the pause. Busy signal is then heard.
“VTL” during the pause. Busy signal is then heard.
Remote server does not
respond
respond
Test the connection to the
remote system using the
Query Remote function.
remote system using the
Query Remote function.
After you finish dialing a VTL call, you get a busy
signal and the message “All ports busy” appears in
the telephone display panel.
signal and the message “All ports busy” appears in
the telephone display panel.
1. No VTL license installed.
2. VTL device extensions not
added to Extension List
*0006.
added to Extension List
*0006.
3. All local VTL connections
are currently in use.
are currently in use.
4. All VTL connections at the
remote site are currently in
use.
remote site are currently in
use.
1. Verify that the licenses
appear when you access the
tab.
appear when you access the
tab.
2. Verify that the *0006
extension contains the VTL
device extensions.
extension contains the VTL
device extensions.
3. On the Virtual Tie Line tab,
verify that there is at least one
idle VTL connection.
verify that there is at least one
idle VTL connection.
4. Use the Query Remote
function to verify that there is
at least one idle VTL
connection.
function to verify that there is
at least one idle VTL
connection.