3com 4210G Manual De Usuario
3-3
Figure 3-3
Appearance of a rear mounting bracket
(1) Screw hole used to fix the mounting bracket to the cabinet (Use one M6 screw)
For the selection of front and rear mounting brackets, see
.
Table 3-2
Selection of mounting bracket for Switch 4210G
Model
Physical dimensions
(H × W × D)
Configuration
type of front
mounting bracket
Configuration
type of rear
mounting
bracket
Switch 4210G 24-Port
Switch 4210G 48-Port
Switch 4210G NT 24-Port
Switch 4210G NT 48-Port
Switch 4210G 48-Port
Switch 4210G NT 24-Port
Switch 4210G NT 48-Port
43.6 × 440 × 300 mm
(1.72 × 17.32 × 11.81 in.)
(1.72 × 17.32 × 11.81 in.)
Standard —
Switch 4210G PWR 24-Port
Switch 4210G PWR 48-Port
Switch 4210G PWR 48-Port
43.6 × 440 × 420 mm
(1.72 × 17.32 × 16.54 in.)
(1.72 × 17.32 × 16.54 in.)
Standard Standard
Use Front Mounting Brackets to Install a Switch
Only the Switch 4210G 24-Port, Switch 4210G 48-Port, Switch 4210G NT 24-Port, and Switch 4210G
NT 48-Port support installation using front mounting brackets.
NT 48-Port support installation using front mounting brackets.
Follow these steps to mount a switch into a 19-inch standard cabinet:
Step1
Wear an ESD-preventive wrist strap and ensure a good skin contact and grounding.
Step2
Check the grounding and stability of the cabinet.
Step3
Take out the screws which are packed together with the front mounting brackets, and fix one end of
mounting brackets to the switch, as shown in
mounting brackets to the switch, as shown in