3com 4210G Manual De Usuario

 

5-12 

 

  BOOT  MENU 

 

1. Download application file to flash 

2. Select application file to boot 

3. Display all files in flash 

4. Delete file from flash 

5. Modify bootrom password 

6. Enter bootrom upgrade menu 

7. Skip current configuration file 

8. Set bootrom password recovery 

9. Set switch startup mode 

0. Reboot 

 

Enter your choice(0-9): 

Enter 0 to restart the device. After that, the updated Boot ROM file becomes effective. 

Select  1 in Boot Menu to load the host software of the switch. The system displays the following 
information:  

1. Set TFTP protocol parameter  

2. Set FTP protocol parameter  

3. Set XMODEM protocol parameter  

0. Return to boot menu 

 

Enter your choice(0-3):2 

To load the host software through FTP, select 2.  

The subsequent steps are almost the same as those for loading the Boot ROM software, except that the 
system gives the prompt for host software loading instead of Boot ROM loading.  

You can telnet to the switch, and use FTP or TFTP to load Boot ROM and host software remotely.  

As shown in 

, a PC is used as both configuration device and FTP server. You can telnet to the 

switch, and then execute the FTP commands to download the host program 4210G.bin and the Boot 
ROM program 4210G.btm from the remote FTP server (with IP address 202.10.10.53) to the switch.  

Load software using FTP/TFTP remotely 

 

 

Download the software to the switch using FTP commands.