Force10 Networks E1200i Manual De Usuario
Installing and Maintaining the E1200i System
75
This appendix provides information about using an external flash memory card and contains the following
sections:
sections:
•
•
•
•
•
•
External Flash Memory Card Overview
Each RPM card is designed with a slot to accommodate an external flash memory card (slot0:). You can
use a flash card to copy the image and configuration files for storage and backup purposes. For complex
configurations, use the copies for other E1200i systems in your network. Configure your boot execution
process to use the images stored on a flash card as the primary (active), secondary (standby), or default
boot order preference. Optional external flash memory cards are shipped blank.
use a flash card to copy the image and configuration files for storage and backup purposes. For complex
configurations, use the copies for other E1200i systems in your network. Configure your boot execution
process to use the images stored on a flash card as the primary (active), secondary (standby), or default
boot order preference. Optional external flash memory cards are shipped blank.
Inserting the External Flash Memory Card
Appendix A
Using a Flash Memory Card
Note: Only insert the external flash before system boot or after the system has completed its boot
and is run-time mode.
and is run-time mode.