Schneider Electric E4800 Manual De Usuario
PowerLogic
TM
EM4800 Series
930-110-01-B.00
Installation
04/2011
© 201
Schneider Electric All Rights Reserved
32
In Diagnostics mode, the right and left arrow buttons scroll the display from
meter 1 to 8, 1 to 12, or 1 to 24, depending on your configuration. When the
local IP address is shown on the LCD, use the right and left arrow buttons to
scroll through the following information:
meter 1 to 8, 1 to 12, or 1 to 24, depending on your configuration. When the
local IP address is shown on the LCD, use the right and left arrow buttons to
scroll through the following information:
•
Remote host server IP address
•
Time server IP address
•
Default IP address
•
Default NetMask
•
Default gateway
•
PPP user name
•
Phone number
•
AT command string
•
Alternate phone number
•
Unit serial number
•
Firmware build number
•
Ethernet port MAC address
•
Firmware revision
•
Potential transformer ratio
Remote Display
For installation and operating instructions for the EM4800 Remote Display
(part number METSxEM48RD), refer to the "PowerLogic Remote Display Kit
for EM4800 Meters" technical document.
(part number METSxEM48RD), refer to the "PowerLogic Remote Display Kit
for EM4800 Meters" technical document.
Recording the Meter Map
The final step in the installation process is to complete the Installation
Record, and record the mapping of the meters to the wired points. A copy of
Figure 16, which is organised to resemble a breaker panel, is provided with
each PowerLogic EM4800 meter, and is to be completed and delivered to
your system administrator.
Record, and record the mapping of the meters to the wired points. A copy of
Figure 16, which is organised to resemble a breaker panel, is provided with
each PowerLogic EM4800 meter, and is to be completed and delivered to
your system administrator.