Schneider Electric E4800 Manual De Usuario
930-110-01-B.00
PowerLogic
TM
EM4800 Series
04/2011
Introduction
© 201
Schneider Electric All Rights Reserved
1
INTRODUCTION
This document describes the PowerLogic EM4833, EM4880 and EM4805
meters, including procedures to install and start up the unit, and complete the
initial configuration:
meters, including procedures to install and start up the unit, and complete the
initial configuration:
•
•
•
•
•
This documentation is intended for those responsible for installing and
configuring the PowerLogic EM4833, EM4880 and EM4805 meters.
Installers must be qualified electricians with knowledge of local and national
code requirements. See “Safety Precautions” on page 6.
configuring the PowerLogic EM4833, EM4880 and EM4805 meters.
Installers must be qualified electricians with knowledge of local and national
code requirements. See “Safety Precautions” on page 6.
System Description
The PowerLogic EM4833, EM4880 and EM4805 meters support:
•
single-phase, 2-wire
•
single-phase, 3-wire (network)
•
three-phase wye and Delta services
Depending on how the meters are installed and configured, they can meter
8, 12, or 24 individual meter points. The PowerLogic EM4833, EM4880 and
EM4805 meters are designed for residential, commercial, and industrial use
and display the power and consumption readings for each measurement
point.
8, 12, or 24 individual meter points. The PowerLogic EM4833, EM4880 and
EM4805 meters are designed for residential, commercial, and industrial use
and display the power and consumption readings for each measurement
point.
PowerLogic EM4800 series System
Specifications
Specifications
The PowerLogic EM4800 series system architecture includes:
•
single-phase, 2-wire; single-phase, 3-wire (network); and three-phase
compatibility
compatibility
•
120/208V, 120/240V and 277/480V configurations, and 347/600V with
external potential transformers
external potential transformers
•
up to 8, 12, or 24 individual meter points
•
local Ethernet configuration interface via PC and web browser
•
on-board modem and Ethernet ports for remote reporting
•
serial port for remote display
•
2 pulse inputs to connect metering devices
Table 1 lists the system specifications of the PowerLogic EM4833, EM4880
and EM4805 meters.
and EM4805 meters.