Schneider Electric TSXETG100 Manual De Usuario

™ Ethernet Gateway

© 2006 Schneider Electric. All Rights Reserved.

Before you begin, keep in mind the following:

For master mode usage of the COM port:

•

Modbus devices do not have to be defined in the Device List, but it helps 
you manage your system.

If you selected Master mode on the Serial Port page, follow the steps below 
to set up the device list:

1. From the Setup page, click Device List.

Opens the Device List page.

2. Select the number of viewable devices (1 to 

128), then click Apply.

Selects the number of viewable locations that 
can be used to define serial slave devices 
connected to the ETG.

3. In the Local ID text box, type the local ID 

(address) of the serial slave device.

Enters the local address of the device.

4. Repeat step 3 until all of the devices are 

entered.

Enters all of the connected devices.

5. Click Apply.

Updates the Device List settings.