TP-LINK TD-W8950ND Manual De Usuario

Choose “Advanced Setup”Æ“LAN” Æ”IPv6 LAN Config”, and you will see the screen (shown in 
Figure 4-23), the section allows you to configure LAN IPv6 interfaces for the modem router. 

 

Figure 4-23 

¾

  Site Prefix Configuration Type: Choose a type to assign prefix to IPv6 addresses. Prefix 

Delegated WAN Connection and Site Prefix (Static) are provided. 

1) If Prefix Delegated WAN Connection is chosen, the modem router will get an IPv6 prefix 

from the default gateway interface.   

2) If Site Prefix (Static) is chosen, please enter an IPv6 prefix. 

¾

  IPv6 LAN Applications: Select a type to assign IPv6 addresses to the computers in your 

LAN. DHCPv6 Server and RADVD are provided. 

1) If Stateless is selected, it doesn’t need to be configured. 

2) If Stateful is selected, please complete the following parameters. 

 

• 

Start interface ID: Enter a value for the DHCPv6 server to start with when issuing IPv6 
addresses. 

• 

End interface ID: Enter a value for the DHCPv6 server to end with when issuing IPv6 
addresses. 

• 

Leased Time (hour): The Leased Time is the amount of time in which a network user will 
be allowed to connect to the modem router with their current dynamic IPv6 address. 
Enter the amount of time, in hours, then the user will be “leased” this dynamic IPv6 

33