Black Box ET10000A Manual De Usuario
10
EncrypTight Manager Installation Guide
Figure 1
EncrypTight Manager Console view
Configuring Networking Parameters
Once the machine is running, you can configure networking parameters. This includes assigning a static
IP address, netmask, and gateway address.
IP address, netmask, and gateway address.
To configure an IP address and netmask:
1 Click in the console window to activate it.
2 Use the arrow keys to highlight Configure Network and press Enter.
3 At the Network Configuration Main Menu, type
1 Click in the console window to activate it.
2 Use the arrow keys to highlight Configure Network and press Enter.
3 At the Network Configuration Main Menu, type
6
and press Enter.
4 At the prompt to configure an IPv4 address, type
y
and press Enter.
5 At the prompt to use DHCP, type
n
and press Enter.
6 At the IPv4 prompt enter the IP address that you want to use and press Enter.
7 At the Netmask prompt, enter the netmask that you want to use and press Enter.
8 When you are prompted for confirmation, type
7 At the Netmask prompt, enter the netmask that you want to use and press Enter.
8 When you are prompted for confirmation, type
y
and press Enter.
To configure the gateway address:
1 At the Main Menu, type
1 At the Main Menu, type
2
and press Enter.
2 At the prompt to choose an interface to associate with the default gateway, type the number and press
Enter.
3 At the IPv4 default Gateway prompt, type the IP address of the gateway and press Enter.