Cabletron Systems BRIM-E100 Manual De Usuario
Chapter 3: Installation
Page 3-2
BRIM-E100 User’s Guide
3.2 INSTALLING FAST ETHERNET INTERFACE
MODULES
Install a Fast Ethernet Interface Module into the BRIM-E100 as follows:
1. Attach the disposable grounding strap to your wrist and to a proper
ground. Refer to the instructions outlined on the disposable grounding
strap package.
strap package.
2. Remove the screws securing the Fast Ethernet Interface Module
coverplate to the standoffs on the BRIM-E100 and remove the
coverplate from the BRIM-E100 (see Figure 3-1).
coverplate from the BRIM-E100 (see Figure 3-1).
3. Remove the screw from the top of the standoff at the rear of the
BRIM-E100.
Figure 3-1
Removing the Coverplate on the BRIM-E100
COVERPLATE
166509
STANDOFF
TX
RX
BRIM-E100
book Page 2 Friday, April 19, 1996 9:53 AM