Bay Technical Associates none Manual De Usuario
Installing the BayStack Advanced Remote Node
114200 Rev. A
1-21
Connecting a Terminal Console
You need both pieces in the ARN console/modem cable kit (Order No. 110310) to
connect a terminal console:
connect a terminal console:
•
Order No. 110307 serial console/modem cable (with 9-pin receptacle to
25-pin plug connectors)
25-pin plug connectors)
•
Order No. 110308 null modem crossover adapter (with two 25-pin receptacle
connectors)
connectors)
Once you have the appropriate equipment, complete the following steps:
1.
Power on and configure the console, using the parameters in
Refer to the console user manual for instructions.
2.
Power off the console.
3.
Attach the null modem crossover adapter to the 25-pin cable connector.
4.
Insert the screw on the cable connector into the receptacle on the adapter
connector and tighten the screw
connector and tighten the screw
.
Figure 1-14.
Attaching the Null Modem Adapter
Table 1-3.
Console Parameters
Parameter
Value
Baud Rate
9600
Data Bits
8
Stop Bits
1
Parity
None
Null modem adapter
Console cable
Screw receptacle
Rotate to tighten screw
AN0010A