ZyXEL Communications ISG50 Manual De Usuario
Chapter 12 Interfaces
ISG50 User’s Guide
270
12.7.2 Bridge Add/Edit
This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP
settings, and connectivity check for each bridge interface. To access this screen, click the Add icon
at the top of the Add column in the Bridge Summary screen, or click an Edit icon in the Bridge
Summary screen. The following screen appears.
settings, and connectivity check for each bridge interface. To access this screen, click the Add icon
at the top of the Add column in the Bridge Summary screen, or click an Edit icon in the Bridge
Summary screen. The following screen appears.
Object References
Select an entry and click Object References to open a screen that shows which
settings use the entry. See
settings use the entry. See
#
This field is a sequential value, and it is not associated with any interface.
Status
This icon is lit when the entry is active and dimmed when the entry is inactive.
Name
This field displays the name of the interface.
IP Address
This field displays the current IP address of the interface. If the IP address is 0.0.0.0,
the interface does not have an IP address yet.
the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address (STATIC) or
dynamically assigned (DHCP). IP addresses are always static in virtual interfaces.
dynamically assigned (DHCP). IP addresses are always static in virtual interfaces.
Member
This field displays the Ethernet interfaces and VLAN interfaces in the bridge interface. It
is blank for virtual interfaces.
is blank for virtual interfaces.
Apply
Click Apply to save your changes back to the ISG50.
Reset
Click Reset to return the screen to its last-saved settings.
Table 77
Configuration > Network > Interface > Bridge (continued)
LABEL
DESCRIPTION