ZyXEL Communications G-3000H Manual De Usuario

G-3000H User’s Guide

Chapter 5 Wireless Configuration

69

The following table describes the bridge labels in this screen.

Table 15   Wireless: Bridge/Repeater

Operating Mode

Select Bridge/Repeater in this field to display the screen as shown.

Choose Channel ID

Set the operating frequency/channel depending on your particular region. 
To manually set the ZyAIR to use a channel, select a channel from the drop-

down list box. Click MAINTENANCE and then the Channel Usage tab to open 

the Channel Usage screen to make sure the channel is not already used by 

another AP or independent peer-to-peer wireless network. 
To have the ZyAIR automatically select a channel, click Scan instead. 
Refer to the 

Wizard Setup

 chapter for more information on channels.

Scan

Click this button to have the ZyAIR automatically scan for and select a channel 

with the least interference.

RTS/CTS Threshold

(Request To Send) The threshold (number of bytes) for enabling RTS/CTS 

handshake. Data with its frame size larger than this value will perform the RTS/

CTS handshake. Setting this attribute to be larger than the maximum MSDU 

(MAC service data unit) size turns off the RTS/CTS handshake. Setting this 

attribute to zero turns on the RTS/CTS handshake. Enter a value between 800 

and 2432.

Fragmentation 

Threshold

The threshold (number of bytes) for the fragmentation boundary for directed 

messages. It is the maximum data fragment size that can be sent. Enter a 

value between 800 and 2432.