ZyXEL Communications G-3000H Manual De Usuario
G-3000H User’s Guide
70
Chapter 5 Wireless Configuration
See
for information on the other labels in this screen.
5.6.3 AP+Bridge Mode
Click the WIRELESS link under ADVANCED. Select AP+Bridge as the Operating Mode
to display the screen as shown next. In this screen, you can configure the ZyAIR to function as
an AP and bridge simultaneously. See the section on ZyAIR applications for more
information.
to display the screen as shown next. In this screen, you can configure the ZyAIR to function as
an AP and bridge simultaneously. See the section on ZyAIR applications for more
information.
Enable WDS Security Select the check box to enable WDS on your ZyAIR. A Wireless Distribution
System (WDS) is a wireless connection between two or more APs.
When you select the check box, you are prompted to type a Pre-Shared Key
When you select the check box, you are prompted to type a Pre-Shared Key
(PSK). The ZyAIR uses TKIP to encrypt traffic on the WDS between AP’s.
Note: Other AP’s must use the same encryption method to
enable WDS.
enable WDS.
#
This is the index number of the bridge connection.
Active
Select the check box to enable the bridge connection. Otherwise, clear the
check box to disable it.
Remote Bridge MAC
Address
Type the MAC address of the peer device in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
PSK
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
Table 15 Wireless: Bridge/Repeater
LABEL
DESCRIPTIONS