ZyXEL Communications ZyWALL 1000 Manual De Usuario
Chapter 6 Tutorials
ZyWALL USG 1000 User’s Guide
127
Figure 46 Status: Interface Status Summary After Port Grouping
6.1.2 Set up Ethernet Interfaces
This example sets up the Ethernet interfaces as shown below.
You have decided to use the default settings for ge1 and ge3, so it is not necessary to edit these
interfaces. You can also skip ge2 because there are no physical ports associated with it
anymore. Therefore, the following steps set up ge4 and ge5.
interfaces. You can also skip ge2 because there are no physical ports associated with it
anymore. Therefore, the following steps set up ge4 and ge5.
1 Click Network > Interface > Ethernet. The following screen appears.
Figure 47 Network > Interface > Ethernet, Initial
2 Click the Edit icon for ge4, as shown above, and set up the IP address as shown below.
Table 30 Ethernet Interfaces Example
ETHERNET INTERFACE
SETTINGS
ge1
192.168.1.1/24, DHCP server
ge3
DHCP client
ge4
172.23.37.240/24
ge5
10.0.0.1/24, DHCP server