ZyXEL Communications 1000 Manual De Usuario
Chapter 44 AAA Server
ZyWALL USG 1000 User’s Guide
730
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS
screen.
screen.
Figure 485 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
Table 205 Configuration > Object > AAA Server > RADIUS
LABEL
DESCRIPTION
Add
Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
you can modify the entry’s settings.
Remove
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
you want to remove it before doing so.
Object
References
References
Select an entry and click Object References to open a screen that
shows which settings use the entry. See
shows which settings use the entry. See
for
an example.
#
This field displays the index number.
Name
This is the name of the RADIUS server entry.
Server
Address
Address
This is the address of the AD or LDAP server.
Base DN
This specifies a directory. For example,
o=ZyXEL, c=US
.
Host
Enter the IP address (in dotted decimal notation) or the domain name (up
to 63 alphanumeric characters) of a RADIUS server.
to 63 alphanumeric characters) of a RADIUS server.
Authentication
Port
Port
The default port of the RADIUS server for authentication is 1812.
You need not change this value unless your network administrator
instructs you to do so with additional information.
instructs you to do so with additional information.
Key
Enter a password (up to 15 alphanumeric characters) as the key to be
shared between the external authentication server and the ZyWALL.
shared between the external authentication server and the ZyWALL.
The key is not sent over the network. This key must be the same on the
external authentication server and the ZyWALL.
external authentication server and the ZyWALL.
Timeout
Specify the timeout period (between 1 and 300 seconds) before the
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
ZyWALL disconnects from the RADIUS server. In this case, user
authentication fails.
Search timeout occurs when either the user information is not in the
RADIUS server or the RADIUS server is down.
RADIUS server or the RADIUS server is down.
Apply
Click Apply to save the changes.
Reset
Click Reset to return the screen to its last-saved settings.