Carrier Access Access Navigator Manual De Usuario

After sending the load command, the CLI will respond with a series of status messages.

Transmission complete.
Programming flash . . .
Software update succeeded.

Download software via Internet TFTP.
The Controller update software file must be located on a TFTP 
file server accessible by both the Telnet management terminal 
and the Access Navigator. Trivial File Transfer Protocol (TFTP) 
allows a file to be sent over a network by specifying the server IP 
address and file name or path name. Using an RS-232 or Telnet 
management session, the operator sends a load tftp command 
to the Access Navigator, specifying the location of the TFTP 
server and update file. TFTP server capabilities, including time-
out settings, must match the bandwidth of the network being 
used. Depending on the file size and network speed, the file 
transfer may take several minutes.

Upgrade active Controller card.

Upgrade standard Controller card.

IP address where software update file is stored. IP address has 
format xxx.xxx.xxx.xxx, where xxx is a number from 0 to 255.

File name including path used to locate the update software. 
Carrier Access software file names are shortened for 
compatibility with PC and UNIX systems. For example, a 
Carrier Access part number for GR-303 software such as 019-
0050 version 1.72 would be shortened to 0050172.303. 
Similarly, DCS software 019-0051 version 1.72 would be 
shortened to 00510106.DCS. Software providing different 
feature options will have different part numbers.