Carrier Access Access Navigator Manual De Usuario
Access Navigator - Release 1.8
August 2003
18-145
CLI Language Reference
CLI Command List
Show EOC
Purpose:
Displays the current primary and secondary TMC locations.
Security:
Level 3 (monitor)
Syntax:
show eoc
Message:
EOC Settings:
Primary: DS1 #25 channel 12
Secondary: DS1 #29 channel 12
Primary: DS1 #25 channel 12
Secondary: DS1 #29 channel 12
Description:
Show Ethernet
Purpose:
Displays the Ethernet media access control (MAC) address, as well as the Ethernet IP
address and mask. which is the physical network address of the Ethernet port. The
MAC address is the physical network address of the Ethernet port. It is fixed by
hardware and can not be changed.
address and mask. which is the physical network address of the Ethernet port. The
MAC address is the physical network address of the Ethernet port. It is fixed by
hardware and can not be changed.
Security:
Level 3 (monitor)
Syntax:
show ethernet
Message:
IP Address and Mask: 192.168.118.65 255.255.255.0
MAC Address: 00-E0-97-00-08-37
MAC Address: 00-E0-97-00-08-37
Description:
Item
Description
Primary
Primary EOC. The default is DS1 #25, DS0 #12.
Secondary
Secondary EOC. The default is DS1 #29, DS0 #12.
Item
Description
IP Address
Each Access Navigator on the same Ethernet network must have
a unique static Internet Protocol (IP) address. IP addresses have
the format xxx.xxx.xxx.xxx, where each xxx is a decimal
number between 0 and 255. For example, 192.168.0.123 is a
valid IP address. Note that the address contains only three
periods, one between each of the four numbers. If the Ethernet
interface is not used, type none for the IP address.
a unique static Internet Protocol (IP) address. IP addresses have
the format xxx.xxx.xxx.xxx, where each xxx is a decimal
number between 0 and 255. For example, 192.168.0.123 is a
valid IP address. Note that the address contains only three
periods, one between each of the four numbers. If the Ethernet
interface is not used, type none for the IP address.