Carrier Access Access Navigator Manual De Usuario
Access Navigator - Release 1.8
August 2003
18-147
CLI Language Reference
CLI Command List
Syntax:
show interface <"name"|all>
Example:
show interface "AcmeT1"
Example:
show interface all
NOTE:
The first two messages below are typical for DS1 connections to a
remote port. The third message is typical for internal crossconnections from the
remote T1 Drop to another remote port.
remote T1 Drop to another remote port.
Message:
Settings for Interface "AcmeT1"
Interface Channels: 9:13-18
Remote Port: T1Drop
Interface Type: Voice
Interface Channels: 9:13-18
Remote Port: T1Drop
Interface Type: Voice
Message:
Settings for Interface "AcmeV35"
Interface Channels: 9:19-24
Remote Port: V35
Interface Type: Data
Interface Channels: 9:19-24
Remote Port: V35
Interface Type: Data
Message:
Settings for Interface "AcmeRemote"
DS1: 9
T1Drop Channels: 11-12
Remote Port: FX
Interface Type: Remote
DS1: 9
T1Drop Channels: 11-12
Remote Port: FX
Interface Type: Remote
Description:
Field
Description
name
The user defined name for the interface. The name must be
enclosed in quotes.
enclosed in quotes.
all
Display settings for all fractional interfaces.
Item
Description
Interface Channels
DS1 number, 1 to 32, and range of DS0 numbers such as 5-8.
(DS1 is the remote terminal number.)
(DS1 is the remote terminal number.)
Remote Port
FX, RS-232, T1 Drop, V.35. (FX only applies to “Remote”
interface type.)
interface type.)
Interface Type
Voice, Data, GR-303, Remote.
DS1
DS1 number, 1 to 32, of remote terminal.
T1Drop Channels
Range of DS0 numbers on T1 Drop to be connected to Remote
Device port.
Device port.