Carrier Access 1750 Manual De Usuario

The Broadmore 1750 is designed to provide continuous service with minimal 
maintenance provided operational conditions remain within specifications. Cooling 
fans are included in the Broadmore 1750 to aid in heat dissipation. The fan tray has two 
air filters, one on each fan. Complete the fan filter cleaning procedure below on a 
monthly basis, or more often if the filters are excessively dirty. It is not necessary to 
power down the Broadmore 1750 for this routine maintenance.

1. Loosen screws and remove the chassis front cover.

2. Loosen screws and remove the fan tray by pulling on the Center handle.

3. Remove the fan filters from the bottom of the tray. Each filter snaps out of 

place.

4. The filters are re-usable. Wash them in a mild soapy solution, clean 

thoroughly, and dry completely. Additional filters may be obtained from the 
manufacturer, Globe Motors (part # FFM745) or Customer Service. Filters 
may be replaced with new ones. 

5. Snap the filters back into place.

6. Re-install the fan tray, being careful to align it in the guides   provided. Ensure 

the fans are operating properly, then tighten the screws to hold the fan tray in 
place.

7. Replace the chassis front panel and secure retaining screws.

This is the only routine maintenance required for the Broadmore 

1750.