Carrier Access CMG Router Manual De Usuario

This example is with an Adit 600 with the following cards installed:

Controller Card (4.0 or higher)

CMG Router Card, 1.0 or higher (example - slot 6)

3 FXS Cards, 1.03 or higher (example - slots 1, 2 and 3). Cards are configured for 
Loop Start POTS lines.

Adit 600: the DS0s supporting the bundled service delivery will be cross-
connected to the CMG card

Adit 600: the CMG voice channels are connected to the FXS channels

Adit 600 CMG: the VoIP parameters and data parameters are configured

Adit 600 uses endpoint prefix "aaln" and endpoint suffix "1-48" i.e. channel 1 
would be suffix "1", channel 5 would be suffix "5"