Black Box EncrypTight Enforcement Point (ETEP) Manual De Usuario

Descargar
Página de 88
Installation
48
ETEP Installation Guide
Cabling Requirements: ET10000A
 outlines the standard cables used with each port on the ET10000A. The connector type listed 
indicates only what is required to connect to the ET10000A port, and may or may not be the same 
connector type required for the other end of the cable. Some cables are supplied by Black Box and others 
are user-supplied.
NOTE
To meet the requirements of FCC Part 15 and the EU EMC Directive 2004/108/EC, use only shielded 
Category 5 cables with the ET10000A Ethernet management port
Table 19
 ET10000A Standard Cables
ET1000A Port
Cabling
Supplied by...
Power receptacles
Power supply cables certified 
and approved for use in the 
country of interest
Black Box
RS-232 Port
1.8 meter shielded null modem 
able with an RJ45 connector at 
one end and a DB9 female 
connector at the opposite end.
Black Box
10/100 Ethernet Management 
Port (RJ-45)
Unshielded Category 5 straight 
through cable (STP), RJ-45 
connector
a
a. The 10/100 Ethernet management port is auto-sensing for polarity. You can use a 
unshielded
 Category 5 straight 
through cable or a 
unshielded
 crossover cable when connecting to this port.
Black Box
Gigabit Ethernet Management 
port (SFP)
Not applicable. Port is not 
enabled in this release.
Not applicable
USB Management port 
Not applicable. Port is not 
enabled in this release
Not applicable
Local and Remote Gigabit 
Ethernet ports
• Optical SFP transceivers
• 1000Base-LX SFPs
9/125
m single-mode duplex 
fiber or simplex fiber pair (1 
transmit, 1 receive), 1310 nm 
nominal wavelength, LC 
connector
OR
• 1000Base-SX SFPs 
62.5/125
m multi-mode 
duplex fiber or simplex fiber 
pair (1 transmit, 1 receive), 
850nm nominal wavelength, 
LC connector
Available as accessory options
Local and Remote Gigabit 
Ethernet ports
• Copper SFP transceivers
Unshielded Category 5 straight 
through cable (STP), RJ-45 
connector
Available as accessory options
Aux1 ports (SFP and RJ-45)
Not applicable. Ports are not 
enabled in this release.
Not applicable