Black Box kv1081a Manual De Usuario

®

The ServSwitch CX Uno IP models provide an 
autosensing Ethernet IP port that can operate 
at 10 or 100Mbps, according to the network 
speed. The ServSwitch CX Uno IP models are 
designed to reside quite easily at any part of 
your network: 

•  They can be placed within the local 

network, behind any firewall/router 
connections to the Internet, or

•  They can be placed externally to the local 

network, on a separate sub-network or with an open Internet connection.   

Wherever in the network an ServSwitch CX Uno IP is situated, you will need to 
determine certain configuration issues such as address allocation and/or firewall 
adjustment to allow correct operation. Please refer to 

 within 

the Configuration chapter for more details. 
IMPORTANT: When an ServSwitch CX Uno IP is accessible from the public Internet 
or dial up connection, you must ensure that sufficient 

1  Depending upon where in the network the ServSwitch CX Uno IP is being 

connected, run a category 5, 5e or 6 link cable from the appropriate hub or 
router to the ServSwitch CX Uno IP unit.

2  Connect the plug of the link cable into the IP port on the front panel of the 

ServSwitch CX Uno IP unit.

3  Configure the network settings as appropriate to the position of the 

ServSwitch CX Uno IP within the network - see 

details.    

®

®

BLACK

BOX