Black Box kv1081a Manual De Usuario

®

Each computer system is connected to the 
ServSwitch CX Uno IP unit via a Server Access 
Module (SAM) and standard category 5, 5e or 6 
cabling. CAMs are available in various formats 
to suit differing computer system types and 
their particular connector styles.
Each SAM uses Keep Alive technology to 
ensure that the keyboard and mouse inputs 
to the computer remain active, even when 
the particular channel is not selected. This action ensures that there are no 
connection delays or problems as the port is selected.  

1  Ensure that power is disconnected from the ServSwitch CX Uno IP unit and 

the system to be connected. 

2  Locate the required SAM (there are five types available) and attach its video, 

keyboard and mouse (PS/2-style, USB or Sun) connectors to the relevant 
sockets on the computer system. 

3  Lay a suitable length of category 5, 5e or 6 cabling between the computer 

system and the ServSwitch CX Uno IP unit. The maximum length of the 
cable can be up to 10 metres (32 feet), however, bear in mind that the 
overall distance between a remote user and any computer must not exceed 
300 metres (980 feet).

4  Attach the connector of the cable 

run to the socket of the SAM.

5  At the other end of the cable run, attach the cable connector to one of the 

sockets labelled 

COMPUTER CONNECTIONS

 on the rear panel of the ServSwitch 

CX Uno IP unit.    

Video 

PS/2-style mouse 

PS/2-style keyboard

Audio

USB keyboard/mouse

Sun keyboard/mouse

®

®

Note: Each SAM is 
specifically shaped so 
that it can be secured 
using a cable tie around 
its middle. In this way, 
two CAMs can also be 
neatly joined together, 
back-to-back.