Sanyo HF15000L Manual De Usuario

Installation

Lens Installation

Before setting up the projector, install Projection Lens on the projector.

Before installation, check where the projector is used and prepare a suitable lens. For the specifications of

Projection Lens, contact sales dealer where you purchased the projector.

- Lens installation and replacement should be performed by the qualified service personnel.

- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a

surface.

- When carrying or holding up the projector, be careful not to put your hands on lens part. It may

damage lens, cabinet, or mechanical parts.

Positioning Projector

This projector is designed to project on a flat projection

surface.

✔

Note:

• Brightness in room has a great influence on picture

quality. It is recommended to limit ambient lighting in
order to provide the best image.

SCREEN

Picture Level and Pitch Adjustment

ADJUSTABLE
FEET

The projection angle is adjustable up to 3 degrees upward

and downward respectively by rotating front and back feet

To raise the projector, rotate the feet clockwise.

To lower the projector or to retract the adjustable feet,

rotate the feet counterclockwise.

To correct keystone distortion, press the KEYSTONE

button on the remote control or select Keystone from the

menu (see pages

32, 46, 53).

Do not rotate the adjustable feet when you

see the red line on the adjustable feet. The

adjustable feet may fall off.

Red line

Adjustable feet