Sanyo HF15000L Manual De Usuario

NOTE ON THE POWER CORD

AC power cord must meet the requirements of the country where you use the projector. Confirm the AC plug type with
the chart below and proper AC power cord must be used. If the supplied AC power cord does not match your AC outlet,
contact your sales dealer.

Projector side

AC Outlet side

To POWER CORD
CONNECTOR on your
projector.

Ground

To the AC Outlet.
(00-40 V AC)

For Continental Europe

For the U.S.A. and Canada

For the U.K.

To the AC Outlet.

(00–40 V AC)

To the AC Outlet.

(00–40 V AC)

Connecting the AC Power Cord

Installation

Ground

This projector uses nominal input voltages of 200-240 V AC. It

is designed to work with single-phase power systems having a

grounded neutral conductor. To reduce the risk of electrical shock,

do not plug into any other type of power system.

If you are not sure of the type of power being supplied, consult

your authorized dealer or service center.

Connect the projector with all peripheral equipment before turning

on the projector.

CAUTION

The AC outlet must be near this equipment and must be easily

accessible.

✔

Note:

• Unplug the AC power cord or turn off the MAIN ON/OFF

Switch when the projector is not in use. When the projector
is in stand-by mode, it consumes a little electric power.

Connect the AC power cord to the projector.

Secure the power cord connector with the clamp.

Insert the both ends of the power cord clamp into the

holes and tilt the clamp.

A power cord clamp is designed to prevent the AC power cord

from coming loose. Attach the power cord clamp and AC power

cord to the projector by following these steps.

Power cord clamp

Holes