Sanyo HF15000L Manual De Usuario

Basic Operation

What is PIN code?

PIN (Personal Identification Number) code is a security code

that allows the person who knows it to operate the projector.

Setting a PIN code prevents unauthorized use of the projector.

A PIN code consists of a four-digit number. Refer to the PIN

code lock function in the Setting Menu on pages 64

, 65 for

locking operation of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE

If you forget your PIN code, the projector can no

longer be started. Take a special care in setting

a new PIN code; write down the number in a

column on page 95 of this manual and keep it

on hand. Should the PIN code be missing or

forgotten, consult your dealer or service center.

Press the ON/STAND-BY button on the side control or

the STAND-BY button on the remote control, and Power

off? appears on the screen.

Press the ON/STAND-BY button on the side control or

the STAND-BY button on the remote control again to

turn off the projector. The LAMP indicator lights bright

and the POWER indicator turns off.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE yOU TURN

THE PROjECTOR ON, WAIT AT LEAST FIVE MINUTES

BEFORE TURNING IT OFF.

When the projector has cooled down enough, the

POWER indicator lights green and then you can turn on

the projector.

Power off? disappears after 4 seconds.

✔

Note:

• When the Direct On function is set to On, the projector will

be turned on automatically by connecting the AC power cord
to an AC outlet (p.63).

• The running speed of cooling fans is changed according to the

temperature inside the projector.

• Do not put the projector in a case before the projector is

cooled enough.

• If the WARNING TEMP. indicator blinks red, see “Warning

Indicators” on page 79.

• The projector cannot be turned on during the cooling period

with the POWER indicator turned off. You can turn it on again
after the POWER indicator becomes green again.

DO NOT OPERATE THE PROjECTOR CONTINUOUSLy

WITHOUT REST. CONTINUOUS USE MAy RESULT

IN SHORTENING THE LAMP LIFE. TURN OFF THE

PROjECTOR AND LET STAND FOR ABOUT AN HOUR

IN EVERy 4 HOURS.

Turning Off the Projector

Direct OFF function

You can disconnect the power cord from the wall

outlet or turn off the breaker even during projection

without pressing the ON/STAND-BY button.

✔

Note:

• When using the Direct OFF function, you cannot

restart the projector immediately after the power is
disconnected. If the external power supply is suddenly
cut off, the fan stops immediately. The lamp remains
high temperature and needs to be cooled.