Sanyo HF15000L Manual De Usuario

Maintenance and Care

AMC unit

Maintaining the AMC unit

AMC unit

Filter cleaning
unit cover

Dust collects here.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when

operating the projector. Usage in these environments may

cause a poor image quality.

When using the projector under dusty or smoky conditions,

dust may accumulate on a lens, liquid crystal panels, or optical

elements inside the projector. Such condition may degrade the

quality of the projected image.

When the symptoms above are noticed, contact your authorized

dealer or service center for proper cleaning.

Mesh filter

Overturn the AMC unit and loosen the 2 screws that

secure the filter cleaning unit.

Loosen the 2 screws that secure the AMC unit and

pull it out.

After opening the filter cleaning unit cover, take out

the dust bin from the filter cleaning unit, empty the

dust bin by discarding the dust into a trash bin or

carefully sucking up the dust with a vacuum cleaner,

clean the brush, place back the dust bin, and then

close the cover.

Remove the dust on the projector and air vents.

Press the ON/STAND-BY button on the side control

or the STAND-BY button on the remote control, flip

the Main On/Off Switch off, and then unplug the AC

power cord from the AC outlet.

3
4

Close the dust tray
slowly and dispose
the dust.

Screws

Dust tray

Filter cleaning unit

When you suck
up the dust with
a vacuum cleaner,
use a crevice tool.

Dust bin

Place the AMC unit back into the projector and fix it

with the 2 screws.

Plug the power cord and power on the projector.

✔

Note:

• Do not reset the filter counter if the filters were not replaced.

Brush