Toshiba TDP-TW420 Manual De Usuario
68
69
Netw
ork and
USB memor
y
Displaying computer’s screens via projectors using
Multiscreen function
Multiscreen function
1
Launch the Network Utility
software application.
The Screen Image transmission mode window
appears on the computer’s screen.
appears on the computer’s screen.
2
Click on the Multiscreen icon
.
The Network Utility window changes to
Multiscreen transmission mode.
Multiscreen transmission mode.
3
Select Transmission mode.
Click on Update automatically or Update manually. See step
8
for the meanings of
Update automatically and Update manually.
4
Click on the Advanced button.
The Multiscreen: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
appears. Set the dialog as shown below, as
necessary.
Interruption
Check the No Interruptions checkbox to
prevent other computers from interrupting the
projector, for example, during presentation.
Window Display
Select the Place in Tasktray at the start
of transmission checkbox to iconify the
Network Utility and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click on this
icon, or right click and select Open from the
popup menu. Even with the Network Utility
window minimized, you can use the pop-
up menu to stop or resume transmission as
described in step
Check the No Interruptions checkbox to
prevent other computers from interrupting the
projector, for example, during presentation.
Window Display
Select the Place in Tasktray at the start
of transmission checkbox to iconify the
Network Utility and place it in the computer’s
tasktray when transmission initiated.
To display the window, double click on this
icon, or right click and select Open from the
popup menu. Even with the Network Utility
window minimized, you can use the pop-
up menu to stop or resume transmission as
described in step
5
and later.
Transmission Mode (Image)
Selecting High quality improves the quality of the projected image, but lowers
communication speed. Selecting High speed has the opposite effect.
Transmission Mode (Sound)
Check the Transmit sound to a projector (Only when connected with one
projector) checkbox to transmit the sound being played on a computer to the
projector.
Note: The sound can be sent when only one projector is connected.
Selecting High quality improves the quality of the projected image, but lowers
communication speed. Selecting High speed has the opposite effect.
Transmission Mode (Sound)
Check the Transmit sound to a projector (Only when connected with one
projector) checkbox to transmit the sound being played on a computer to the
projector.
Note: The sound can be sent when only one projector is connected.
■
•
•
•
•
Network Mouse Controller
Check the Control computer mouse pointer using remote control (Only when
connected with one projector) checkbox to control computer mouse pointer
with Mouse control button, PAGE+ button, PAGE - button, L-CLICK button and
R-CLICK button of the computer’s remote control.
Note 1: This function is available when only one projector is connected to computer.
Note 2: When you use the Network Mouse Controller function, do not connect the
Check the Control computer mouse pointer using remote control (Only when
connected with one projector) checkbox to control computer mouse pointer
with Mouse control button, PAGE+ button, PAGE - button, L-CLICK button and
R-CLICK button of the computer’s remote control.
Note 1: This function is available when only one projector is connected to computer.
Note 2: When you use the Network Mouse Controller function, do not connect the
mouse remote control receiver to your computer. The function will fail to
operate properly.
operate properly.
5
Select the Transmission Image you
wish the projector to display.
Select Desktop
The computer screen image is transmitted as-is.
Select application window
Select a running application (e.g. Microsoft
®
PowerPoint
®
), and send that application’s
window only.
The desktop and a list of running applications are displayed.
Select the desired application from this list. (If the desired
application is not on the list, launch it. Note that if too many
applications are running, it will consume the computer’s
resources, which could slow communication speed.)
Select the desired application from this list. (If the desired
application is not on the list, launch it. Note that if too many
applications are running, it will consume the computer’s
resources, which could slow communication speed.)
6
Arrange the virtual display layout.
1 Clicking on the Display Properties button in
the Control window displays the window for
screen display settings.
screen display settings.
2 Right click on the desired virtual display
(Toshiba DPJ Secondary Display Driver) and
select Attached from the popup menu.
select Attached from the popup menu.
3 Allocate screen displays by drag and drop
monitor icons.
4 Click OK button in the window for screen
display settings, then the Screen Layout
in the Control window will be updated
accordingly.
in the Control window will be updated
accordingly.
When you check Switch to the last screen
settings when using next time. the virtual
display layout that has been set will be memorized
upon exit from Network Utility and it will switch
to the screen settings the next time you use the
Multiscreen feature.
settings when using next time. the virtual
display layout that has been set will be memorized
upon exit from Network Utility and it will switch
to the screen settings the next time you use the
Multiscreen feature.
•
Using the Network Utility (Continued)