Toshiba TDP-TW420 Manual De Usuario
70
71
Netw
ork and
USB memor
y
7
Select the projector to be
transmitted.
The IDs of projectors accessible for transmission
will be listed. (When a projector name is set, that
name appears instead of MAC address. )
Check the checkbox of the projector you wish to
transmit to from this list. And select the virtual
display number that you wish to transmit to from
the pull-down list in the Screen box. Then
icon marked with a number (corresponding to the screen number) is displayed on the
selected projector’s screen for a few seconds. Up-to four projectors are available to
select.
will be listed. (When a projector name is set, that
name appears instead of MAC address. )
Check the checkbox of the projector you wish to
transmit to from this list. And select the virtual
display number that you wish to transmit to from
the pull-down list in the Screen box. Then
icon marked with a number (corresponding to the screen number) is displayed on the
selected projector’s screen for a few seconds. Up-to four projectors are available to
select.
8
Click on the
button.
When “Update automatically” is selected in step
3
Screen images are sent consecutively after the
button is clicked. Besides,
the sound being played on a computer can be sent to the projector.
When “Update manually” is selected in step
3
A single screen image is sent when the
button is clicked.
Using the Network Utility (Continued)
Multiscreen Usage Examples
Example 1)
While projecting data sent from your computer on a screen, you can also display the other
data such as a presenter script on your computer so that you can give a presentation
without showing any data which you do not wish to let other participants see.
data such as a presenter script on your computer so that you can give a presentation
without showing any data which you do not wish to let other participants see.
●
Example 2)
Using only a single computer, you can make an effective presentation by displaying different
data stored in the computer via two projectors.
data stored in the computer via two projectors.
Example 3)
Sending images from a single computer to multiple projectors (up to four projectors), a
larger image can be achieved by combining those images.
larger image can be achieved by combining those images.
Note
The examples shown here are illustrated as projectors are connected to a computer
via wireless LAN, however, this also applies for the connection via wired LAN.
Note that the brightness or the color tint of the projected image may vary depending
on each projector. This is an optical characteristic and not a malfunction. (Please
adjust with the Image adjustment menu.)
via wireless LAN, however, this also applies for the connection via wired LAN.
Note that the brightness or the color tint of the projected image may vary depending
on each projector. This is an optical characteristic and not a malfunction. (Please
adjust with the Image adjustment menu.)
CAUTION
When you use multiple projectors for Multiscreen feature, make sure to leave
suffi cient space (more than OOcm) between projectors. If you set the projector near
the air exhaust of the other projector, it may cause damage to other units due to heat.
suffi cient space (more than OOcm) between projectors. If you set the projector near
the air exhaust of the other projector, it may cause damage to other units due to heat.
•
•