Viewsonic VS13835 Manual De Usuario

STACK menu settings

242

ViewSonic 

Pro9500

3.

  Press the ◄ button to return to the previous menu, or press the ► button to 

complete the setting.   

NOTE

  • If FIXED (COMPUTER IN 1) is selected, either the 

COMPUTER IN1 

or 

IN2 port can be selected as an input source on the Main projector.  When the 

COMPUTER or VIDEO button on the remote control or the INPUT button on 

the projector is pressed, the MAIN INPUT SOURCE dialog will be displayed on 

screen.  Select COMPUTER IN 1 or COMPUTER IN 2 with the ▲/▼ buttons.  
 • If FIXED (COMPUTER IN 1) is selected, the 

COMPUTER IN1 port on the 

Sub projector should be connected to the 

MONITOR OUT port on the Main 

projector with a computer cable.  The image from the selected port is output 

from the 

MONITOR OUT port on the Main projector to the COMPUTER IN1 

port on the Sub projector.  The MONITOR OUT setting on the Main projector 

is disabled when FIXED (COMPUTER IN 1) is selected. (Operating Guide → 

SETUP menu)  
• If FIXED (COMPUTER IN 1) is selected, video signals can be input to the 

COMPUTER IN1 or IN2 port on the Main projector.  Set the port for video 

signal input in the COMPUTER IN menu and set the video format in the VIDEO 

FORMAT menu.  Refer to Inputting image from Main to Sub  and Inputting 

image from Main to Sub - Video signal (either component or video). 

3.5 Selecting input source for Sub
1.

  Highlight SUB INPUT SOURCE in the STACK 

menu with the ▲/▼ buttons, then press the ► 

button to display the SUB INPUT SOURCE dialog.

2.

  Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT or FIXED 

(COMPUTER IN 1). 

FOLLOW MAIN UNIT: Sets the input source on the Sub projector to the same 

port as Main. 

FIXED (COMPUTER IN 1): Sets the input source on the Sub projector to the 

COMPUTER IN1 port which is connected to the MONITOR OUT port on the 

Main projector.