Viewsonic VS13835 Manual De Usuario

STACK menu settings

244

ViewSonic 

Pro9500

3.7 Important information for Intellectual Stack  

This section provides important information for setting up the Main and Sub 

projectors, not explanations on operating the menus.  Read all information carefully.
● To use Intellectual Stack, one projector must be set to Main and the other set to 

Sub.

● When stacking the two projectors, the control panel of the projector placed 

underneath cannot be operated. It is therefore strongly recommended to set the 

projector underneath to Sub and the projector on top to Main.

● All buttons except the 

STANDBY/ON button on the control panel of the Sub 

projector are disabled.  Operate the projectors with the control panel of the Main 

projector or the remote control.

● Pressing the 

STANDBY/ON button of the Sub projector does not allow you to 

turn off only the Sub projector.  The Main and Sub projectors turn off when the 

button is pressed for more than 3 seconds.  And pressing the button does not 

turn on the Main or Sub projector.

● The Main projector is capable of receiving the remote control signals but not the 

Sub projector so the remote control should be pointed at the Main projector.

● If a wired remote control is used, connect the cable to the Main projector instead 

of the Sub projector.

● For simple PC mouse & keyboard functions, connect both the Main and Sub 

projectors to your computer with USB cables. (Operating Guide → Using as a 

simple PC mouse & keyboard)

● AUTO SEARCH function is disabled when the projector is used in Intellectual 

Stack.

● Network communication to Sub and Web Control on Sub cannot turn on the Sub 

projector.  The Sub projector can only be controlled through the Main projector.

● Remote Control function on Web Control of the Sub projector is disabled. 

(Network Guide → 3.11 Remote Control)

● If you try to turn on the projectors using the Power on & Display on feature on 

the Messenger function, the projectors will exit Intellectual Stack and display the 

specified message.  To start Intellectual Stack again, re-select MAIN/SUB on 

both projectors in the STACK MODE dialog, or turn off and on both projectors 

again.

● The Main and Sub projectors have the following common settings.

- Muting feature (Operating Guide → Temporarily muting the sound)

- Magnifying feature (Operating Guide → Using the magnify feature)

- ASPECT and OVER SCAN (Operating Guide → IMAGE menu)

- COMPUTER IN (Operating Guide → INPUT menu) 

- MESSEAGE (Operating Guide → SCREEN menu)

- MY BUTTON (Operating Guide → OPTION menu)

- TEMPLATE (Operating Guide → SCREEN menu)