Viewsonic PRO8200 Manual De Usuario

ViewSonic  Pro8200

23

1.

Remove the projector lens cap.

2.

Complete the AC power cord and peripheral signal cable(s) connections.

3.

Press 

 to turn on the projector.

The projector takes a minute or so to warm up. 

4.

Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.

„

If you are connecting multiple sources to the projector simultaneously, press

SOURCE on the projector to select your desired signal or press your desired
signal key on the remote control. 

„

Remove the lens cap first before powering on.

„

Never look into the lens when the lamp is on. This can damage your eyes.

„

This focal point concentrates high temperature. Do not place any object near

it to avoid possible fire hazard.

1.

Press 

 to turn off the projector lamp. You will see a message "Power off"

appear on the screen.   

2.

Press 

 again to confirm.

„

When the Power LED begins flashing, the projector has entered stand-by 

mode.

3.

Disconnect the AC power cord from the electrical outlet and the projector.

4.

Do not turn on the projector right after power off