Viewsonic VS13647 Manual De Usuario

ViewSonic  Pro8400

18

The projector provides two VGA input sockets that allow you to connect them to both 
IBM

®

 compatibles and Macintosh

®

 computers. A Mac adapter is needed if you are 

connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
1.

Take the supplied VGA cable and connect one end to the D-Sub output socket of 
the computer.

2.

Connect the other end of the VGA cable to the Computer in 1 or Computer in 2 
signal input socket on the projector.

„

Many notebooks do not turn on their external video ports when connected to 

a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the 
external display on/off. Locate a function key labeled CRT/LCD or a function 
key with a monitor symbol on the notebook. Press FN and the labeled 
function key simultaneously. Refer to your notebook's documentation to find 
your notebook's key combination.

If you want to view your presentation close-up on a monitor as well as on the screen, 
you can connect the Monitor Out signal output socket on the projector to an external 
monitor with a VGA cable following the instructions below:
To connect the projector to a monitor:
1.

Connect the projector to a computer as described in 

.

2.

Take a suitable VGA cable (only one supplied) and connect one end of the cable 
to the D-Sub input socket of the video monitor.
Or if your monitor is equipped with a DVI input socket, take a VGA to DVI-A cable 
and connect the DVI end of the cable to the DVI input socket of the video monitor.

3.

Connect the other end of the cable to the Monitor Out socket on the projector.

„

The Monitor Out output only works when Computer in 1 or Computer in 2 

is made to the projector.