Viewsonic PJ1065 Manual De Usuario

The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the 
appropriate measures.

• When the internal temperature becomes excessive, power is switched OFF automatically 

for safety reasons, and the indicator is extinguished. Set the power switch to [O] and wait for 20 

minutes until the equipment has cooled sufficiently.

Lit 

orange

Turns off

Turns off

The Standby mode has been set.

Blinks

green

Turns off

Turns off

Warming up. Please wait.

Lit

green

Turns off

Turns off

ON. Normal operation possible.

Blinks

orange

Turns off

Turns off

Cooling down. Please wait.

Lit red

Lit red

Turns off

Lamp is not lit.
The interior of the equipment may be too hot. Switch power 
OFF, wait 20 minutes until the equipment cools, and check 
whether the ventilation openings are blocked, whether the air 
filter is dirty, or whether the ambient temperature exceeds 35 
°C. And switch power ON again. Replace the lamp if the same 
problem occurs.

Lit red

Blinks 

red

Turns off

Lamp or lamp cover is not found, or hasn’t been fitted in 
correctly.
Switch power OFF, and wait for 45 minutes until the equipment 
cools. Check fitting of the lamp and lamp cover, and switch 
power ON again. Contact your dealer if the same problem 
occurs again.

Lit red

Turns off

Blinks 

red

The cooling fan is not operating.
Switch power OFF, and wait for 20 minutes until the equipment 
cools. Check for foreign matters in the fan, and switch power 
ON again. Contact your dealer if the same problem occurs 
again.

Lit red

Turns off

Lit red

The interior of the equipment is too hot.
Switch power OFF, and wait for 20 minutes until the equipment 
cools. Check whether the ventilation openings
are blocked, whether the air filter is dirty, or whether the ambient 
temperature exceeds 35 °C. Then switch power
ON again. Contact your dealer if the same problem occurs 
again.