Viewsonic PJ1172 Manual De Usuario

This projector provides the NETWORK function. If you use this 

function, please set up the projector according to the Network 

environment in which you use it.

When you use a Network suitable to the DHCP function, the 

following operation is not required commonly, because the TURN 

ON is selected to the item “DHCP” at the shipment time. Please see the section “Network 
Setting Up”.

Item

Description

SETUP

Pressing the X (or the ENTER) button calls 

the IP ADDRESS menu.

This item performs only when the TURN 

OFF is set to the item “DHCP” of this 

NETWORK menu.
The IP Address is identification number of the projector on the 

Network.
1. Set the IP Address using the S/T buttons.

The same number as the IP Address of other units cannot be 

used.
Pressing the X (or the ENTER) button at the 

IP ADDRESS menu calls the SUBNET 

MASK menu. The SUBNET MASK is an 

address of the Network.
2. Set the same number as the address of 

the Network to be used.
Pressing the X (or the ENTER) button at the 

SUBNET MASK menu calls the DEFAULT 

GATEWAY menu. The DEFAULT GATEWAY 

is the address of the main device.
3. Set the same number as the address of 

the device as gateway to an outer Network.

DHCP

Select TURN ON or TURN OFF using the S/T buttons. :

    TURN ON  TURN OFF
When you use a Network unsuitable to the DHCP 

function, select TURN OFF.

INFORMATION

Pressing the X (or the ENTER) button 

displays the INFORMATION menu.
The INFORMATION menu shows the 

information about the current Network setting 

as illustrated below.

RESET

Select EXECUTE using the S button to reset NETWORK menu 

items. :

    EXECUTE  CANCEL
The items of the NETWORK menu are collectively returned to the 

initial setting.