Garmin CINEMA 200+ Manual De Usuario

To adjust the sharpness or size of the image:

Note: Before starting, you may want to display a test pattern to facilitate adjustment. Press the 
Pattern button on the remote control, then select Cross-hatching.

1. Press the 

Focus

 or 

Zoom

 button on the projector or 

remote control. You see this screen:

2. Use the    arrow buttons to adjust the image 

sharpness or size.

Note: If you use the remote control, you can stand close 
to the screen while focusing the image. This lets you 
adjust the picture more precisely.

3. Press 

E

SC

 when done.

If you’re using the projector’s Input A port, select the correct setting for the type of video 
equipment you’ve connected to it:

1. Press the 

Menu

 button on the remote control.

2. Use the menu navigation buttons to open the 

Setting

 menu, then open the 

Input Signal 

menu and select 

Input A

.

3. Choose from these options:

■ YCbCr

 for a video player that outputs an NTSC signal.

■ YPbPr

 for a video player that outputs an HDTV signal.

■ RGB-Video

 for a video player that outputs an RGB video signal. 

Note: Check the label next to the port on your video equipment, if you’re unsure of which 
setting to use.

PowerLite Cinema 200+.book  Page 21  Thursday, August 18, 2005  2:37 PM