Garmin CINEMA 200+ Manual De Usuario

If the image is displayed upside-down or backward, change the Projection option:

1. Press the 

Menu

 button on the remote control.

2. Use the menu navigation buttons to open the 

Setting

 

menu, then open the 

Screen

 menu and select 

Projection

.

3. Choose from these options:

■ Front

 if the projector is located in front of the 

screen (for example, on a table).

■ Front/Ceiling

 if the projector is located in front 

of the screen and mounted overhead.

■ Rear

 if the projector is located behind the screen. 

■ Rear/Ceiling

 if the projector is located behind the screen and mounted overhead. 

If the image is not centered on the screen, use the horizontal and vertical lens shift knobs to 
adjust its position.

Note: You can display a test pattern to make adjustment easier. Press the Pattern button on the 
remote control, then select Cross-hatching.

If you still need to raise the height of the image after using the vertical lens shift knob, lift the 
front of the projector and rotate the adjustable feet until the image is positioned correctly. 
You can also use the feet to correct the angle of the image if it’s tilted.

Menu

button

Menu

navigation

buttons

Adjustable feet

Vertical lens shift knob

Horizontal lens shift knob

PowerLite Cinema 200+.book  Page 22  Thursday, August 18, 2005  2:37 PM